
New
DANLEY Hyper ArmourMate Full Joint – 250-300mm Slab – 20mm DD @ 450cts (Gal) 3m with 10mm Expansion Foam
SKU: AJDHY245FJG-E
SKU: AJDHY245FJG-E
Categories: Armour Joints, New Products
Hyper ArmourMate™ is a premium armour edging solution and is designed for applications where the concrete edge and wear surface must withstand materials handling traffic with small hard wheels carrying high-loads on a daily basis, in particular, semi-automated and automated materials handling environments.
Danley™ Hyper ArmourMate™ provides slab edge protection to prevent concrete spalling.
- Hyper Edge Protection Galv to suit 250-300mm Slabs with 20mm DD at 450 centres.
- 3 metre lengths
- with 10mm expansion foam
Features
- Top Rail or Full Joint System configurations.
- 40mm x 10mm Rails manufactured from highquality, precision Cold Drawn Steel
- Complies with ACI recommendations for FF and FL tolerances.
- Patented 20mm Diamond™ Dowel.
Asset Protection Benefits
- Reduces concrete spalling damage at the joints.
- Provides a safer operating environment for tenant employees.
- Reduces floor maintenance and downtime costs over the life-cycle of the facility.
- Extends the life-cycle of the asset by protecting the floor.
- Provides a level of future proofing for environment and layout changes.
- Increases tenant satisfaction and return on investment.
Engineering Benefits
- Galvanised formwork plate is standard with all systems.
- Cold drawn rail materials provide highest impact resistance and straightness tolerances.
- Is in compliance with ACI recommendations, highest FF and FL tolerances.
- Diamond™ Dowel ensures the minimum risk of restraint due to lateral and diagonal shrinkage.
- Accuracy of dowel placement height and centres ensures the most effective load transfer performance.
- Hyper Edge Protection Galv to suit 250-300mm Slabs with 20mm DD at 450 centres.
- 3 metre lengths
- with 10mm expansion foam
Features
- Top Rail or Full Joint System configurations.
- 40mm x 10mm Rails manufactured from highquality, precision Cold Drawn Steel
- Complies with ACI recommendations for FF and FL tolerances.
- Patented 20mm Diamond™ Dowel.
Asset Protection Benefits
- Reduces concrete spalling damage at the joints.
- Provides a safer operating environment for tenant employees.
- Reduces floor maintenance and downtime costs over the life-cycle of the facility.
- Extends the life-cycle of the asset by protecting the floor.
- Provides a level of future proofing for environment and layout changes.
- Increases tenant satisfaction and return on investment.
Engineering Benefits
- Galvanised formwork plate is standard with all systems.
- Cold drawn rail materials provide highest impact resistance and straightness tolerances.
- Is in compliance with ACI recommendations, highest FF and FL tolerances.
- Diamond™ Dowel ensures the minimum risk of restraint due to lateral and diagonal shrinkage.
- Accuracy of dowel placement height and centres ensures the most effective load transfer performance.
Related products
-
NewArmour JointsSKU: AJDWP245FJG
DANLEY WavePlate Full Joint – 250-300mm Slab – 20mm DD @ 420cts (Gal) 2.1m
ex-GST
See Product -
NewSaleMBW Trowel MachinesSKU: M36270
MBW 36″ Honda GX270 Walk Behind Trowel Machine
$4,600.00ex-GST
See Product -
NewBituminous TapeSKU: BRTS100020
1000mm Road Tape – 20m Roll
$622.50ex-GST
See Product -
NewExpose RetarderSKU: EXPMVG10
Milano V-Gel – Vertical Exposed Aggregate Retarder – 10L
$150.00ex-GST
See Product